Home
» Schneider Electric » Controllers » Schneider BMENOR2200H

Schneider BMENOR2200H

0.00

The price is not final. Please check with the manager!
SKU: BMENOR2200H Categories: , Tag:

Schneider Electric Communication module, Modicon M580, IEC 60870-5-101/104, DNP3, for severe environments

Contact Sales

Datasheet

Main
Range of product Modicon X80
Product or component type Communication module
Product compatibility BMEXBP… – Ethernet + X-bus rack
Complementary
Integrated connection type 1 RS232, connector type: RJ45, transmission rate: 115200 bit/s, transmission mode: 8 wires
1 RS485, connector type: RJ45, transmission rate: 115200 bit/s, transmission mode: 1 twisted shielded pair
1 Ethernet, transmission rate: 100 Mbit/s, transmission mode: Ethernet backplane
Communication service DNP3 NET server SAv2/SAv5 with pre-shared key
DNP3 NET client SAv2/SAv5 with pre-shared key
IEC 60870-5-101 server/client
IEC 60870-5-104 server/client
Modbus TCP messaging
Web server (HTTPS), HTML5
FDR client
SNTP client
SNMP agent
Time stamped events management
Automatic events backup on power loss
Transparent events routing from remote servers to SCADA
Data logging service
Cybersecurity Role-based access control
System hardening
Secure communiction (HTTPS)
Achilles certified
Syslog protocol support
Transport Layer Security for RTU protocols
SNMP logging
Certificate based authentication
Memory description Support flash SD memory card (BMXRMS004GPF) 4 GB
Supply Internal power supply via rack
Protective treatment Conformal coating
Dielectric strength 1500 V DC for 1 min, between Serial port and bus/earth
Shock resistance 30 gn
Current consumption 110 mA at 24 V DC
Length 86 mm
Width 32 mm
Height 131 mm
Net weight 0.38 kg
Environment
Ambient air temperature for storage -40…85 °C
Ambient air temperature for operation -25…70 °C
Relative humidity 5…95 % at 55 °C
IP degree of protection IP20
Directives 2014/35/EU – low voltage directive
2014/30/EU – electromagnetic compatibility
2014/34/EU – ATEX directive
Product certifications CE
UL
CSA
RCM
EAC
Merchant Navy
ATEX zone 2/22
IECEx zone 2/22
Safety certification non interfering type 1
UKCA
Standards EN/IEC 61131-2
EN/IEC 61010-2-201
UL 61010-2-201
CSA C22.2 No 61010-2-201
IACS E10
EN/IEC 61000-6-5, interface type 1 and type 2
EN/IEC 61850-3, location G
EN/IEC 60079-0
Environmental characteristic Gas resistant class Gx conforming to ISA S71.04
Gas resistant class 3C4 conforming to IEC 60721-3-3
Dust resistant class 3S4 conforming to IEC 60721-3-3
Sand resistant class 3S4 conforming to IEC 60721-3-3
Salt resistant level 2 conforming to IEC 68252
Mold growth resistant class 3B2 conforming to IEC 60721-3-3
Fungal spore resistant class 3B2 conforming to IEC 60721-3-3
Hazardous location class I division 2
Operating altitude 0…2000 m
2000 m…5000 m with derating factor
Vibration resistance 3 gn
Local signalling 1 LED (green/red) for cyber security (SEC)
1 LED (yellow) for serial communication (SER COM)
1 LED (red) for download in progress (DL)
1 LED (red) for processor or system fault (ERR)
1 LED (red) for memory card fault (CARD ERR)
1 LED (green/red) for status of Ethernet network (ETH STS)
1 LED (green) for processor running (RUN)
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8.6 cm
Package 1 Width 3.2 cm
Package 1 Length 13.1 cm
Package 1 Weight 522.0 g

Leave a Reply

Your email address will not be published. Required fields are marked *

Reviews

Reviews about the product Schneider BMENOR2200H