Datasheet
Product characteristics
| Number of inputs and outputs | Number of analogue outputs: 2 |
|---|---|
| Process connection | diameter Ø 8 mm |
Application
| Special feature | Gold-plated contacts | ||
|---|---|---|---|
| Media | water; glycol solutions; air; oils | ||
| Note on media |
|
||
| Medium temperature [°F] | -4…212 | ||
| Pressure rating [bar] | 50 |
Electrical data
| Operating voltage [V] | 18…30 DC |
|---|---|
| Current consumption [mA] | < 100 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 10 |
Inputs / outputs
| Number of inputs and outputs | Number of analogue outputs: 2 |
|---|
Outputs
| Total number of outputs | 2 |
|---|---|
| Output signal | analogue signal |
| Number of analogue outputs | 2 |
| Analogue current output [mA] | 4…20; (scalable) |
| Max. load [Ω] | 350 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Probe length L [mm] | 200 | |
|---|---|---|
| Operating mode | relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended) | |
| Note on factory setting |
|
| Resolution [ft/s] | 0.05 |
|---|---|
| Analogue start point ASP [ft/s] | 0…7.95 |
| Analogue end point AEP [ft/s] | 1.9…9.85 |
| Resolution [ft/s] | 2 |
|---|---|
| Analogue start point ASP [ft/s] | 0…264 |
| Analogue end point AEP [ft/s] | 64…328 |
| Measuring range [°F] | -4…212 |
|---|---|
| Resolution [°F] | 0.5 |
| Analogue start point [°F] | -4…169 |
| Analogue end point [°F] | 39…212 |
| In steps of [°F] | 0.5 |
| Setting range [ft/s] | 0…9.85 |
|---|---|
| Greatest sensitivity [ft/s] | 0.15…9.85 |
| Setting range [ft/s] | 0…19.5 |
|---|---|
| Greatest sensitivity [ft/s] | 0.15…9.85 |
| Setting range [ft/s] | 0…328 |
|---|---|
| Greatest sensitivity [ft/s] | 6…328 |
| Setting range [ft/s] | 0…656 |
|---|---|
| Greatest sensitivity [ft/s] | 6…328 |
Accuracy / deviations
| Temperature drift [cm/s x 1/K] | 0,01 fps x 1/K (< 68 °F; > 158 °F) |
|---|---|
| Temperature gradient [K/min] | 100 |
| Repeatability | 0,05 m/s; (water; flow velocity: 0,05…3 m/s) |
|---|
| Accuracy | ± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 68…158 °F; inlet length: 5 ft; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.) |
|---|---|
| Repeatability | 0,05 m/s; (water; flow velocity: 0,05…3 m/s) |
| Temperature drift | ± 0,003 K/°F |
|---|---|
| Accuracy [K] | ± 0,3 / ± 1; (water; flow velocity: 1…9,85 fps / air; flow velocity: > 32,8 fps) |
Response times
| Response time [s] | 0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09) |
|---|
| Dynamic response T05 / T09 [s] | 1,5 (T09); (water; flow velocity: 1…9,85 fps) |
|---|
Software / programming
| Parameter setting options | medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour |
|---|
Operating conditions
| Ambient temperature [°F] | -40…176 |
|---|---|
| Storage temperature [°F] | -40…212 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC |
|
||||
|---|---|---|---|---|---|
| Shock resistance |
|
||||
| Vibration resistance |
|
||||
| MTTF [years] | 179 | ||||
| UL approval |
|
Mechanical data
| Weight [g] | 310.5 |
|---|---|
| Materials | stainless steel (1.4404 / 316L); PBT-GF20; PBT-GF30 |
| Materials (wetted parts) | stainless steel (1.4404 / 316L) |
| Process connection | diameter Ø 8 mm |
Displays / operating elements
| Display |
|
|---|
Remarks
| Remarks |
|
||
|---|---|---|---|
| Pack quantity | 1 pcs. |
Electrical connection
| Connection | Connector: 1 x M12; coding: A; Contacts: gold-plated |
|---|
