Datasheet
Specification:
| Part Number | 1060533 |
| Initialization time: | < 3 ms |
| Error limits: | ± 54 ° (/pulses per revolution) |
| Storage temperature range: | -40 °C … +100 °C, without package |
| Shaft material: | Stainless steel |
| Operating speed: | 6,000 /min |
| Duty cycle: | ≤ 0.5 ± 5 % |
| Power consumption max. without load: | < 0.5 W (without load) |
| Working temperature range: | -20 °C … +85 °C |
| Mass: | 150 g (with connecting cable) |
| Moment of inertia of the rotor: | 0.8 gcm² |
| Measuring step: | 90 ° / electronically/pulses |
| Short-circuit protection of the outputs: | 1 |
| Reference signal, position: | 90 °, electronically, gated with A and B |
| Material, cable: | PVC |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4 (class A)) |
| Connection type: | Cable, 8-wire, universal, 1.5 m |
| Enclosure rating: | IP 65 |
| Start up torque: | 0.5 Ncm (+20 °C) |
| Reverse polarity protection: | 1 |
| Load current max.: | 30 mA |
| Maximum operating speed: | 8,000 U/min |
| Electrical interface: | 7 V … 30 V, HTL/Push pull |
| Bearing lifetime: | 2 x 10^9 revolutions |
| Maximum output frequency: | 300 kHz |
| Pulses per revolution: | 1,000 |
| Reference signal, number: | 1 |
| Resistance to shocks: | 100 g (EN 60068-2-27) |
| Permissible movement radial static/dynamic: | ± 0.3 mm, ± 0.1 mm |
| Permissible movement axial static/dynamic: | ± 0.5 mm, ± 0.2 mm |
| Mechanical interface: | Blind hollow shaft |
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
| Flange material: | Aluminum |
| Operating torque: | 0.4 Ncm (+20 °C) |
| Max. angular acceleration: | 500,000 rad/s² |
| MTTFd: mean time to dangerous failure: | 600 a (EN ISO 13849-1) |
| Measuring step deviation: | ± 18 ° / impulses per relovution |
| Shaft diameter: | 8 mm |
| Housing material: | Aluminum |
| Resistance to vibration: | 20 g, 10 Hz … 2,000 Hz (EN 60068-2-6) |
