Datasheet
Specification:
| Part Number | 1053183 |
| Resistance to shocks: | 70 g (according to EN 60068-2-27) |
| Mass: | 0.2 kg |
| Error limits: | ± 0.05 ° |
| Initialization time: | 40 ms |
| Operating voltage range: | 10 V … 32 V |
| Resistance to vibration: | 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Load current max.: | 30 mA |
| Permissible movement radial static/dynamic: | ± 0.3 mm, ± 0.1 mm |
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) |
| Measuring step deviation: | ± 0.01 ° |
| Max. angular acceleration: | 500,000 rad/s? |
| Moment of inertia of the rotor: | 40 gcm? |
| Working temperature range: | -30 °C … +100 °C |
| Permissible movement axial static/dynamic: | ± 0.5 mm, ± 0.2 mm |
| Power consumption: | 0.5 W (without load) |
| Bearing lifetime: | 3.6 x 10^10 revolutions |
| Storage temperature range: | -40 °C … +100 °C, without package |
| Shaft diameter: | 12 mm |
| Start up torque: | 0.8 Ncm (+20 °C) |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Connection type: | Cable, 8-wire, universal, 1.5 m |
| Measuring step: | 90 ° / electronically/number of lines |
| Mechanical interface: | Through hollow shaft |
| Reference signal, position: | 90 °, electronically, gated with A and B |
| Operating torque: | 0.6 Ncm (+20 °C) |
| Maximum operating speed: | 9,000 /min |
| Electrical interface: | 10 V … 32 V, HTL/Push pull, Cable, 8-pin, universal, 1.5 m |
| Maximum output frequency: | 600 kHz |
| Pulses per revolution: | 100 |
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
| Shaft material: | Metal |
| Reference signal, number: | 1 |
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
