Datasheet
Specification:
| Part Number | 1062246 |
| IO-Link: | + |
| MTTF: | 194.3 a (EN ISO 13849-1) |
| Conductivity: | No limitation |
| Process connection: | G ? A |
| Ambient storage temperature: | -40 °C … +80 °C |
| GOST approval: | + |
| RoHS certificate: | + |
| Response time: | < 400 ms |
| Wetted parts: | 1.4404, PTFE |
| Signal voltage HIGH: | Vs – 2 V |
| EMC: | EN 61326-1:2006, 2004/108/EG |
| Enclosure rating: | IP 67: EN 60529 |
| Process temperature: | -20 °C … +100 °C |
| Probe length: | 300 mm |
| Temperature drift: | < 0.1 mm/K |
| Ambient temperature operation: | -20 °C … +60 °C |
| Max.probe load: | 6 Nm |
| Maximum level change: | 500 mm/s |
| Protection class: | III |
| Inactive area at probe end: | 10 mm |
| Output load: | 0 V … 10 V > 750 Ohm at Uv >= 14 V, 4 mA … 20 mA < 350 Ohm at Uv > 12 V, 4 mA … 20 mA < 500 Ohm at Uv > 15 V |
| Supply voltage: | 12 V DC … 30 V DC |
| Design: | Standard |
| Inductive load: | < 1 H |
| Measurement: | Switch, Continuous |
| Resolution: | < 2 mm |
| Lower signal level: | 3.8 mA … 4 mA |
| Inactive area at process connector: | 25 mm |
| Initialization time: | ≤ 5 s |
| Power consumption: | ≤ 100 mA at 24 V DC without output load |
| Connection type: | Round connector M12 x 1, 8-pin |
| Capacitive load: | 100 nF |
| Dielectricity constant: | ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe |
| Hysteresis: | Min. 2 mm, free adjustable |
| CULus certificate: | + |
| Output signal: | 1 PNP transistor output (Q1) und 3 PNP / NPN transistor output (Q2…Q4) switchable, 4 mA … 20 mA, 0 V … 10 V automatic switching depending on the load. |
| Accuracy of sensor element: | ± 5 mm |
| Repeatability: | ≤ 2 mm |
| Upper signal level: | 20 mA … 20.5 mA |
| Signal voltage LOW: | ≤ 2 V |
| Output current: | < 100 mA |
| Process pressure: | -1 bar … 10 bar |
| Probe type: | Mono rod probe |
| Housing material: | Plastic PBT |
| Medium: | Fluids |
