Datasheet
Specification:
| Part Number | 1067184 |
| Reverse polarity protection: | + |
| Voltage drop: | ≤ 4 V, ≤ 4.5 V |
| Tightening torque, max.: | ≤ 100 Nm |
| Thread length: | 41 mm |
| Design: | Cylindrical |
| Power consumption: | ≤ 10 mA |
| Copper (Cu): | Ca. 0.4 |
| Output function: | NO |
| Ambient operating temperature: | -25 °C … +75 °C |
| Power-up pulse protection: | – |
| Ripple: | ≤ 10 % |
| Repeatability: | ≤ 2 % |
| Switching frequency: | ± 500 Hz |
| Housing: | Standard |
| Aluminum (Al): | Ca. 0.45 |
| Connection type: | Connector M12, 4-pin |
| EMC: | According to EN 60947-5-2 |
| Supply voltage: | 10 V DC … 30 V DC |
| Power-up pulse: | ≤ 5 ms |
| Housing cap material: | Plastic, PA6 |
| Temperature drift (of Sr): | ± 10 % |
| Enclosure rating: | IP 67 |
| Installation type: | Non-flush |
| D: | 60 mm |
| Electrical wiring: | DC 2-wire |
| Shock/vibration: | 30 g, 11 ms/10 Hz … 55 Hz, 1 mm |
| C: | 30 mm |
| A: | 30 mm |
| Short-circuit protection: | + |
| Remark: | Associated graphic see “Installation” |
| Housing length: | 71 mm |
| B: | 60 mm |
| Output current Ia: | ≤ 100 mA |
| Note: | The values are reference values which may vary |
| F: | 160 mm |
| Assured sensing range Sa: | 16.2 mm |
| Load resistance, min.: | 3 mA |
| Housing material: | Metal, Nickel-plated brass |
| Carbon steel St37 (Fe): | 1 |
| E: | 40 mm |
| Thread size: | M30 x 1.5 |
| Brass (Br): | Ca. 0.4 |
| Off-state current: | ≤ 0.8 mA |
| Stainless steel (V2A, 304): | Ca. 0.8 |
| Hysteresis: | 5 % … 15 % |
| Sensing range Sn: | 20 mm |
| Time delay before availability: | ≤ 100 ms |
