Datasheet
| Presentation | High density, double-conversion on-line power protection with scalable runtime. |
|---|---|
| Lead time | Usually in Stock |
Run time for load
W Enter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
Min-max: 210-2100 W
|
|
|---|---|
Max. Capacity Used
The maximum percentage of UPS capacity used to support your specified load.
|
|
| Main Input Voltage | 230 V |
| Other Input Voltage | 220 V 240 V |
| Main Output Voltage | 230 V |
| Other Output Voltage | 220 V 240 V |
| rated power in W | 2100 W |
| Rated power in VA | 3000 VA |
| Input Connection Type | BS1363A British IEC 60320 C20 Schuko CEE 7 / EU1-16P |
| output connection type | 8 IEC 60320 2 IEC Jumpers 2 IEC 60320 |
| Number of rack unit | 3U |
| Cable length | 2.44 m |
| Number of cables | 1 |
| Battery type | Lead-acid battery |
| Provided equipment | CD with software Relay board Smart UPS signalling RS-232 cable User manual |
| Run Time | View Runtime Graph |
|---|---|
| Efficiency | View Efficiency Graph |
| Number of battery filled slots | 2 |
| Battery recharge time | 2.5 h |
| Number of battery replacement quantity | 1 |
| Additional information | Configurable for 220 : 230 or 240 nominal output voltage |
| Battery charger power | 359 W rated |
| Battery power in VAH | 900 VAh runtime |
| Battery life | 3…5 year(s) |
| Replacement battery | APCRBC140 |
| Battery option | SURT192XLBP 1 2820 VAh SURT192XLBP 2 4740 VAh SURT192XLBP 3 6660 VAh SURT192XLBP 4 8580 VAh SURT192XLBP 5 10500 VAh SURT192XLBP 6 12420 VAh SURT192XLBP 8 16260 VAh SURT192XLBP 10 20100 VAh |
| Extended runtime | 1 |
| Number of power module free slots | 0 |
|---|---|
| Number of power module filled slots | 0 |
| Redundant | No |
| Colour | Black |
|---|---|
| Height | 43.2 cm |
| Width | 13 cm |
| Depth | 66 cm |
| Net weight | 54.55 kg |
| Mounting location | Front |
| Mounting preference | Lower |
| Mounting mode | Rack-mounted |
| Two post mountable | 0 |
| USB compatible | No |
| Network frequency | 50/60 Hz +/- 5 Hz auto-sensing |
|---|---|
| Input voltage limits | 180…270 V |
| Maximum configurable power in W | 2100 W |
|---|---|
| Harmonic distortion | Less than 3 % |
| Output frequency | 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz sync to mains |
| Crest factor | 3 : 1 |
| UPS type | Double conversion online |
| Wave type | Sine wave |
| bypass type | Internal bypass (automatic and manual) |
| Maximum configurable power in VA | 3000 VA |
| Product certifications | CE DNV KCC |
|---|---|
| Standards | EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018 |
| Ambient air temperature for operation | 0…55 °C |
|---|---|
| Relative humidity | 0…95 % non-condensing |
| Operating altitude | 0…10000 ft |
| Ambient air temperature for storage | -15…45 °C |
| Storage Relative Humidity | 0…95 % non-condensing |
| Storage altitude | 0.00…15240.00 m |
| Acoustic level | 55 dBA |
| heat dissipation | 609 Btu/h |
| IP degree of protection | IP20 |
| Free slots | 0 |
|---|---|
| Preinstalled device | Dry contact I/O smartslot card |
| Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Emergency power off | Yes |
| Surge energy rate | 555 J |
|---|---|
| Noise suppression | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 34.7 cm |
| Package 1 Width | 60.3 cm |
| Package 1 Length | 98 cm |
| Package 1 Weight | 63.64 kg |
| Warranty | 2 years repair or replace, optional extended warranties available, optional on-site services available |
|---|
