Home
» Schneider Electric » Schneider SUVTP20KH4B4S

Schneider SUVTP20KH4B4S

0.00

The price is not final. Please check with the manager!

Schneider Electric APC Smart-UPS VT 20kVA 400V w/4 Batt. Mod., Start-Up 5X8, Internal Maint Bypass, Parallel Capability

Contact Sales

Datasheet

Overview
Lead time Usually Ships within 2 Weeks
Main
Run time for load

W

information_circle
Enter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
Min-max: 1600-16000 W
Max. Capacity Used
information_circle
The maximum percentage of UPS capacity used to support your specified load.
Main Input Voltage 400 V 3 phases
Other Input Voltage 380 V
415 V
Main Output Voltage 400 V 3 phases
Other Output Voltage 380 V
415 V
rated power in W 16000 W
Rated power in VA 20000 VA
Output connector type Hard wire 4-wire (3P + E) 1
Hard wire 5-wire (3P + N + E) 1
Connections – terminals 1 screw terminals
Battery type VRLA
Provided equipment Battery modules ship installed
CD with software
Network management card
Power modules ship installed
User manual
Bolt down brackets
Installation guide
Start up included
Batteries & Runtime
Run Time View Runtime Graphaction_new_window
Efficiency View Efficiency Graphaction_new_window
Number of battery filled slots 4
Number of battery free slots 0
Battery recharge time 5 h
Number of battery replacement quantity 4
Additional information Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Battery voltage +/- 192 V (split battery referenced to neutral)
Discharge battery voltage +/- 154 V
Battery charger power 1958 W rated
Battery power in VAH 9810 VAh runtime
Battery life 3…5 year(s)
Battery option SUVTXR2B6S 1 14715 VAh
SUVTXR6B6S 1 24526 VAh
SUVTXR6B6S 2 39329 VAh
SUVTXR6B6S 3 54321 VAh
SUVTXR6B6S 4 69523 VAh
Battery graph comments Estimated runtimes based on battery vendor data, at typical environmental conditions, with no electrical input and balanced PF = 0.8 output.
Extended runtime 1
General
Number of power module free slots 0
Number of power module filled slots 0
Redundant Yes
Physical
Colour Black
Height 149 cm
Width 52.3 cm
Depth 84.2 cm
Net weight 599.09 kg
Mounting location Front
Mounting preference No preference
Mounting mode Not rack-mountable
Two post mountable 0
USB compatible No
Input
Network frequency 40…70 Hz auto-sensing
Number of input connectors 1 hard wire 5-wire (3P + N + E)
Input voltage limits 304…477 V
Maximum input current 27 A
Switching current capacity 50 A
Input Power Factor at Full Load 0.98
Output
Maximum configurable power in W 16000 W
Harmonic distortion Less than 5 % at full load
Output frequency 47…53 Hz for 50 Hz nominal sync to mains
50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised
Crest factor 3 : 1
UPS type Double conversion online
Wave type Sine wave
bypass type Built-in maintenance bypass
Built-in static bypass
Maximum output current 32 A
Maximum configurable power in VA 20000 VA
Conformance
Product certifications C-Tick
CE
RCM
Environmental
Ambient air temperature for operation 0…40 °C
Relative humidity 0…95 %
Operating altitude 0…3333 ft
Ambient air temperature for storage -50…40 °C
Storage Relative Humidity 0…95 %
Storage altitude 0.00…15240.00 m
Acoustic level 51.3 dBA
heat dissipation 3112 Btu/h
IP degree of protection IP20
Communications & Management
Free slots 0
Preinstalled device Network management card 2 with environmental monitoring
Emergency power off Yes
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 164.3 cm
Package 1 Width 106.2 cm
Package 1 Length 65 cm
Package 1 Weight 630 kg
Number of Units in Package 3 1
Contractual warranty
Warranty 1 year repair or replace, Start-Up Service

Leave a Reply

Your email address will not be published. Required fields are marked *

Reviews

Reviews about the product Schneider SUVTP20KH4B4S