Datasheet
Specification:
| Part Number | 1030012 |
| Storage temperature range: | -40 °C … +100 °C, without package |
| Parameterising data: | Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution |
| Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
| Enclosure rating: | IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal |
| Mass: | 0.4 kg |
| Code type: | Binary, Gray |
| Max. angular acceleration: | 500,000 rad/s? |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Permissible relative humidity: | 98 % |
| MTTFd: mean time to dangerous failure: | 150 a (EN ISO 13849-1) |
| Moment of inertia of the rotor: | 55 gcm? |
| Initialization time: | 1,050 ms |
| Clock frequency: | 1 MHz |
| Interface signals: | Clock +, Clock -, Data +, Data-, Programming interface: RS-422 |
| Power consumption max. without load: | 0.8 W |
| SET (electronic adjustment): | H-active (L &;8801; 0 – 4,7 V, H &;8801; 10 – Us V) |
| Permissible movement axial static/dynamic: | ± 0.5 mm, ± 0.2 mm |
| Code sequence: | CW/CCW |
| Resistance to vibration: | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Resolution power: | 4,096 x 4,096 |
| Permissible movement radial static/dynamic: | ± 0.3 mm, ± 0.1 mm |
| CW/CCW (counting sequence when turning): | L-active (L &;8801; 0 – 1,5 V, H &;8801; 2,0 – Us V) |
| Bearing lifetime: | 3.6 x 10^9 revolutions |
| Error limits: | ± 0.25 ° |
| Working temperature range: | -20 °C … +85 °C |
| Resolution: | 12 bit x 12 bit |
| Start up torque with shaft seal: | 1.2 Ncm |
| Shaft diameter: | 6 mm, 1/4 “ 8 mm, 3/8 “ 10 mm, 1/2 “ 12 mm 14 mm 15 mm |
| Max. number of steps per revolution: | 4,096 |
| Electrical interface: | SSI |
| Mechanical interface: | Blind hollow shaft |
| Housing material: | Die-cast aluminum |
| Shaft material: | Stainless steel |
| Connection type: | Cable, 12-pin, radial, 5 m |
| Max. number of revolutions: | 4,096 |
| Measuring step: | 0.043 ° |
| Operating voltage range: | 10 V … 32 V |
| Flange material: | Aluminum |
| Repeat accuracy: | 0.1 ° |
| Operating torque with shaft seal: | 0.8 Ncm |
