Product characteristics

Number of inputs and outputs

Number of digital outputs: 2

Measuring range

-1…10 bar

-14.5…145 psi

-0.1…1 MPa

Process connection

threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5

Application

Measuring element

metallic thin film cell

Application

for industrial applications

Media

liquids and gases

Medium temperature [°C]

-40…90

Min. bursting pressure

300 bar

4350 psi

30 MPa

Pressure rating

25 bar

360 psi

2.5 Mpa

Note on pressure rating

static

Vacuum resistance [mbar]

-1000

Type of pressure

relative pressure

Electrical data

Operating voltage [V]	18…30 DC
Current consumption [mA]	< 15
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	< 0.3

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2

Outputs

Total number of outputs	2
Output signal	switching signal; IO-Link; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	100
Switching frequency DC [Hz]	< 130
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range

-1…10 bar

-14.5…145 psi

-0.1…1 MPa

Set point SP

-0.9…10 bar

-13.1…145 psi

-0.09…1 MPa

Reset point rP

-0.949…9.951 bar

-13.8…144.3 psi

-0.0949…0.9951 MPa

In steps of

0.001 bar

0.1 psi

0.0001 MPa

Factory setting

SP1 = 2.5 bar	rP1 = 2.3 bar	ou1 = Hno;
SP2 = 7.5 bar	rP2 = 7.3 bar	ou2 = Hno;
dS1/dS2 = 0 ms	dr1/dr2 = 0 ms
coF = 0 %	P-n = PnP	dAP= 60 ms

Temperature monitoring

Measuring range

-40…90 °C

-40…194 °F

Set point SP

-38…90 °C

-36.4…194 °F

Reset point rP

-40…88 °C

-40…19.4 °F

In steps of

0.1 °C

0.1 °F

Accuracy / deviations

Switch point accuracy [% of the span]	< ± 0,5 (nach DIN EN 61298-2)
Repeatability [% of the span]	< ± 0,05; (with temperature fluctuations < 10 K)
Characteristics deviation [% of the span]	< ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1)
Linearity deviation [% of the span]	< ± 0,1 (BFSL) / < ± 0,2 (LS)
Hysteresis deviation [% of the span]	< ± 0,2
Long-term stability [% of the span]	< ± 0,1; (per 6 months)
Temperature coefficient zero point [% of the span / 10 K]	< 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C)
Temperature coefficient span [% of the span / 10 K]	< 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C)

Temperature monitoring

Accuracy [K]	± 2 K + (0.1 x (ambient temperature – medium temperature))
Notes on the accuracy / deviation	temperature range -10 to 80 °C

Response times

Response time [ms]	< 3

Temperature monitoring

Dynamic response T05 / T09 [s]	< 80 / < 210 ( under ifm reference conditions )

Software / programming

Parameter setting options	hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

Profiles

Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A)

SIO mode

yes

Required master port type

A

Process data analogue

5

Process data binary

2

Min. process cycle time [ms]

4.5

IO-Link resolution pressure [bar]

0.005

IO-Link resolution pressure [MPa]

0.0005

IO-Link resolution temperature [K]

0.2

IO-Link process data (cyclical)

function	bit length
pressure	16
temperature	16
device status	4
binary switching information	2

IO-Link functions (acyclical)

application specific tag; internal temperature; operating hours counter; switching cycles counter; Pressure peak counter; Temperature peak counter

Supported DeviceIDs

Type of operation	DeviceID
Default	1210

Operating conditions

Ambient temperature [°C]	-40…90
Storage temperature [°C]	-40…100
Protection	IP 67; IP 69K

Tests / approvals

EMC

DIN EN 61326-1

Shock resistance

DIN EN 60068-2-27

500 g (1 ms)

Vibration resistance

DIN EN 60068-2-6

20 g (10…2000 Hz)

MTTF [years]

668

UL approval

UL Approval no.	J037
File number UL	E174189

Pressure Equipment Directive

Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight [g]	53.5
Materials	1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI
Materials (wetted parts)	stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630)
Min. pressure cycles	60 million; (at 1.2 times nominal pressure)
Tightening torque [Nm]	25…35; (recommended tightening torque; depends on lubrication, seal and pressure rating)
Process connection	threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5
Process connection sealing	FKM (DIN EN ISO 1179-2)
Restrictor element integrated	yes

Remarks

BFSL = Best Fit Straight Line

LS = limit value setting

Pack quantity

1 pcs.

Electrical connection

Connection	Connector: 1 x M12; coding: A

IFM PV8004 Pressure switch with IO-Link

Datasheet

Leave a Reply Cancel reply

Reviews