Datasheet
Product characteristics
| Resolution | 4096 steps; 4096 revolutions; 24 bit |
|---|---|
| Communication interface | CAN |
| Shaft design | solid shaft |
| Shaft diameter [mm] | 10 |
Application
| Function principle | absolute |
|---|---|
| Revolution type | multiturn |
Electrical data
| Operating voltage [V] | 9…30 DC |
|---|---|
| Current consumption [mA] | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) |
| Protection class | III |
| Reverse polarity protection | yes |
Outputs
| Output function | CANopen interface |
|---|---|
| Short-circuit protection | yes |
| Code | binary |
Measuring/setting range
| Resolution | 4096 steps; 4096 revolutions; 24 bit |
|---|
Accuracy / deviations
| Accuracy [°] | 0.08 |
|---|
Software / programming
| Parameter setting options | CAN parameter; scaling; preset; Baud rate; direction of rotation; Node ID |
|---|
Interfaces
| Communication interface | CAN |
|---|---|
| Number of CAN interfaces | 1 |
| Protocol | CANopen | ||
|---|---|---|---|
| Factory settings |
|
||
| Version | DSP – 406 V3.1; DS 301 V4.02; DS 306 V2.0 | ||
| Terminating resistor | yes |
Operating conditions
| Ambient temperature [°C] | -40…85 |
|---|---|
| Protection | IP 68; IP 69K |
Tests / approvals
| Shock resistance |
|
||
|---|---|---|---|
| Vibration resistance |
|
||
| MTTF [years] | 240 |
Mechanical data
| Weight [g] | 228.2 | |
|---|---|---|
| Dimensions [mm] | Ø 36.5 / L = 100 | |
| Materials | flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating | |
| Max. revolution, mechanical [U/min] | 6000 | |
| Max. starting torque [Nm] | 5 | |
| Reference temperature torque [°C] | 20 | |
| Shaft design | solid shaft | |
| Shaft diameter [mm] | 10 | |
| Shaft material |
|
|
| Max. shaft load axial (at the shaft end) [N] | 180 | |
| Max. shaft load radial (at the shaft end) [N] | 180 | |
| Fixing flange | synchro-flange |
Electrical connection
| Connector: 1 x M12, axial; coding: A |
