Datasheet
| Range compatibility | Lexium 32i |
|---|---|
| Product or component type | Servo motor with power stage |
| Device short name | BMI |
| maximum mechanical speed | 8000 rpm |
|---|---|
| [Us] rated supply voltage | 208…480 V – 15…10 % |
| Supply voltage limits | 208…480 V |
| Network number of phases | Three phase |
| Supply frequency | 50/60 Hz – 5…5 % |
| Network frequency limits | 47.5…63 Hz |
| EMC filter | Integrated |
| Continuous output current | 2 A at 8 kHz |
| Output current 3s peak | 6 A at 400 V for 3 s |
| Continuous stall current | 2 A |
| Continuous stall torque | 2.48 N.m at 208…480 V three phase |
| Peak stall torque | 6.8 N.m at 208 V three phase 6.8 N.m at 400 V three phase 6.8 N.m at 480 V three phase |
| Nominal output power | 400 W at 208 V three phase 800 W at 400 V three phase 900 W at 480 V three phase |
| Nominal torque | 2.4 N.m at 208 V three phase 2.2 N.m at 400 V three phase 2 N.m at 480 V three phase |
| Nominal speed | 1800 rpm at 208 V three phase 3600 rpm at 400 V three phase 4400 rpm at 480 V three phase |
| Maximum current Irms | 9.6 A at 208 V, three phase 9.6 A at 400 V, three phase 9.6 A at 480 V, three phase |
| Product compatibility | Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft diameter | 11 mm |
| Shaft length | 23 mm |
| Feedback type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 32768 points/turn |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 70 mm |
| Electrical connection | Printed circuit board connector |
| Torque constant | 1.15 N.m/A at 20 °C |
| Back emf constant | 77.18 V/krpm at 20 °C |
| Number of motor poles | 10 |
| Rotor inertia | 1.13 kg.cm² |
| Stator resistance | 8.89 Ohm at 20 °C |
| Stator inductance | 25.75 mH at 20 °C |
| Stator electrical time constant | 2.9 ms at 20 °C |
| Maximum radial force Fr | 710 N at 1000 rpm 560 N at 2000 rpm 490 N at 3000 rpm 450 N at 4000 rpm 410 N at 5000 rpm 390 N at 6000 rpm |
| maximum axial force Fa | 0.2 x Fr |
| Type of cooling | Natural convection |
| Length | 268 mm |
| Number of motor stacks | 2 |
| Centring collar diameter | 60 mm |
| Centring collar depth | 2.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 75…82 mm |
| Distance shaft shoulder-flange | 2.5 mm |
| IP degree of protection | Shaft: IP54 Housing: IP65 |
|---|
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 26.0 cm |
| Package 1 Width | 20.0 cm |
| Package 1 Length | 59.0 cm |
| Package 1 Weight | 5.594 kg |
| Unit Type of Package 2 | P06 |
| Number of Units in Package 2 | 8 |
| Package 2 Height | 77.0 cm |
| Package 2 Width | 80.0 cm |
| Package 2 Length | 60.0 cm |
| Package 2 Weight | 53.252 kg |
| Warranty | 18 months |
|---|
