Home
» IFM Electronic » Sensors » Flow sensors » IFM SB1232 Flow meter with integrated backflow prevention and display

IFM SB1232 Flow meter with integrated backflow prevention and display

0.00

The price is not final. Please check with the manager!
SKU: SB1232 Categories: , , Tag:

SBG34KL0FRKG

  • Fast flow or temperature changes do not affect the measurement
  • High measurement dynamics reduces type versions
  • No inlet and output pipe lengths required
  • Specifically adju
Contact Sales

Datasheet

Product characteristics
Measuring range
0.3…15 l/min 0.018…0.9 m³/h 4.8…237.8 gph 0.08…3.965 gpm
Process connection threaded connection G 3/4 internal thread
Application
Special feature Gold-plated contacts
Media Liquids; oils (viscosity 10 mm²/s at 40 °C)
Medium temperature [°C] -10…100
Pressure rating [bar] 100
Pressure rating [Mpa] 10
Note on pressure rating
at medium temperature >70°C: 80 bar / 8 MPa
Electrical data
Operating voltage [V] 18…30 DC; (to SELV/PELV)
Current consumption [mA] < 50
Protection class III
Reverse polarity protection yes
Power-on delay time [s] < 3
Outputs
Total number of outputs 2
Output signal switching signal; analogue signal; frequency signal; IO-Link
Max. voltage drop switching output DC [V] 2
Max. current load per output [mA] 150; (200: …60 °C; Ambient temperature; 250: …40 °C; Ambient temperature)
Analogue current output [mA] 4…20
Max. load [Ω] 500
Short-circuit protection yes
Overload protection yes
Frequency of the output [Hz] 0…10000
Measuring/setting range
Measuring range
0.3…15 l/min 0.018…0.9 m³/h 4.8…237.8 gph 0.08…3.965 gpm
Display range
0…18 l/min 0…1.08 m³/h 0…285.4 gph 0…4.755 gpm
Resolution
0.01 l/min 0.001 m³/h 0.1 gph 0.001 gpm
Set point SP
0.1…15 l/min 0.006…0.9 m³/h 1.6…237.8 gph 0.025…3.965 gpm
Reset point rP
0…14.9 l/min 0…0.894 m³/h 0…236.2 gph 0…3.935 gpm
Frequency end point, FEP
1…15 l/min 0.06…0.9 m³/h 15.8…237.8 gph 0.265…3.965 gpm
In steps of
0.01 l/min 0.001 m³/h 0.2 gph 0.005 gpm
Frequency at the end point FRP [Hz] 10…10000
In steps of [Hz] 10
Measuring dynamics 1:50
Temperature monitoring
Measuring range
-10…100 °C 14…212 °F
Display range
-32…122 °C -25.6…251.6 °F
Resolution
0.1 °C 0.1 °F
Set point SP
-9.3…100 °C 15.2…212 °F
Reset point rP
-10…99.3 °C 14…210.8 °F
In steps of
0.1 °C 0.2 °F
Frequency start point, FSP
-10…78 °C 14…172.4 °F
Frequency end point, FEP
12…100 °C 53.6…212 °F
Frequency at the end point FRP [Hz] 10…10000
Accuracy / deviations
Flow monitoring
Accuracy (in the measuring range) ± 5 % MEW; (Q > 1 l/min; 20…70 °C Medium temperature)
Repeatability ± 1 % MEW
Temperature monitoring
Temperature drift 0,029 °C / K
Accuracy [K] 3 K (25°C; Q > 1 l/min)
Response times
Flow monitoring
Response time [s] 0.01
Damping process value dAP [s] 0…5
In steps of [s] 0.1
Damping for the analogue output dAA [s] 0…5
In steps of [s] 0.1
Temperature monitoring
Dynamic response T05 / T09 [s] T09 = 120 (Q > 1 l/min)
Software / programming
Parameter setting options hysteresis / window; normally open / normally closed; switching logic; current/frequency output; damping for the switching output / analogue output; display can be rotated and switched off; standard unit of measurement; process value colour; calibration factor
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9 CDV
Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO mode yes
Required master port type A
Process data analogue 2
Process data binary 2
Min. process cycle time [ms] 3.2
Supported DeviceIDs
Type of operation DeviceID
Default 1043
Operating conditions
Ambient temperature [°C] 0…60
Note on ambient temperature
medium temperature < 80 °C
medium temperature < 100 °C: 0...40 °C
Storage temperature [°C] -15…80
Protection IP 65; IP 67
Tests / approvals
EMC
DIN EN 61000-6-2
DIN EN 61000-6-3
Shock resistance
DIN EN 60068-2-27 20 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 5 g (10…2000 Hz)
MTTF [years] 145
UL approval
UL Approval no. I005
Pressure Equipment Directive Sound engineering practice
Mechanical data
Weight [g] 993.5
Materials stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated
Materials (wetted parts) stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM
Process connection threaded connection G 3/4 internal thread
Switching cycles mechanical 10 million
Displays / operating elements
Display
Display unit 6 x LED, green
switching status 2 x LED, yellow
measured values alphanumeric display, red/green alternating indication 4-digit
programming alphanumeric display, 4-digit
Remarks
Remarks
Recommendation: use a 200-micron filter.
All data refer to oil with the following nominal viscosity:
10 mm²/s, 40 °C
MW = measured value
MEW = Final value of the measuring range
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; coding: A; Contacts: gold-plated
Diagrams and graphs

Leave a Reply

Your email address will not be published. Required fields are marked *

Reviews

Reviews about the product IFM SB1232 Flow meter with integrated backflow prevention and display