Datasheet
| Range | TeSys |
|---|---|
| Range of product | TeSys F |
| Product or component type | Contactor |
| Device short name | LC1F |
| Contactor application | Motor control Resistive load |
| Utilisation category | AC-1 AC-3 |
| Poles description | 3P |
| [Ue] rated operational voltage | <= 440 V AC 50/60 Hz |
| [Uc] control circuit voltage | 230 V AC 40…400 Hz |
| [Ie] rated operational current | 1250 A (at <40 °C) at <= 440 V AC AC-1 1000 A (at <55 °C) at <= 440 V AC AC-3 |
| [Uimp] rated impulse withstand voltage | 8 kV |
|---|---|
| [Ith] conventional free air thermal current | 1250 A (at 40 °C) |
| Rated breaking capacity | 8 kA conforming to IEC 60947-4-1 |
| [Icw] rated short-time withstand current | 10000 A 40 °C – 10 s 7500 A 40 °C – 30 s 5500 A 40 °C – 1 min 4200 A 40 °C – 3 min 3000 A 40 °C – 10 min |
| Associated fuse rating | 2000 A gG at <= 440 V |
| Average impedance | 0.1 mOhm – Ith 1250 A 50 Hz |
| [Ui] rated insulation voltage | 1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C |
| Power dissipation per pole | 200 W AC-1 |
| Overvoltage category | III |
| power pole contact composition | 3 NO |
| Maximum operating rate | 600 cyc/h 55 °C |
| Operating time | 40…80 ms closing 100…200 ms opening |
| Connections – terminals | Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end Power circuit: bar 3 cable(s) Power circuit: bar 4 cable(s) |
| Mounting support | Plate |
| motor power range | 315 kW at 220…230 V 3 phases 560 kW at 380…400 V 3 phases 630 kW at 415 V 3 phases 670 kW at 440 V 3 phases |
| Motor starter type | Direct on-line contactor |
| Contactor coil voltage | 230 V AC standard |
| Standards | IEC 60947-4-1 EN 60947-1 IEC 60947-1 EN 60947-4-1 |
| Product certifications | CSA CCC CB UKCA |
| Compatibility code | LC1F |
| Control circuit type | AC at 40…400 Hz |
| IP degree of protection | IP20 front face with shrouds conforming to IEC 60529 IP20 front face with shrouds conforming to VDE 0106 |
|---|---|
| Protective treatment | TH |
| Ambient air temperature for operation | -5…40 °C |
| Ambient air temperature for storage | -60…80 °C |
| Permissible ambient air temperature around the device | -40…60 °C |
| Height | 332 mm |
| Width | 438 mm |
| Depth | 238.6 mm |
| Operating altitude | 3000 m without derating |
| Net weight | 31 kg |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 36.1 cm |
| Package 1 Width | 48.3 cm |
| Package 1 Length | 60.3 cm |
| Package 1 Weight | 23 kg |
