Datasheet
Specification:
| Part Number | 1055358 |
| Mechanical interface: | Blind hollow shaft |
| Permissible movement axial static/dynamic: | ± 0.5 mm, ± 0.1 mm |
| Error limits: | ± 0.03 ° |
| Endless operating functionality: | 1 |
| Encoder profile: | 0 x 22 |
| DLR (Device Level Ring): | 1 |
| Max. number of steps per revolution: | 262,144 |
| Power consumption max.: | 3 W |
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
| Type of mounting shaft: | Blind hollow shaft |
| Reverse polarity protection: | 1 |
| Measuring step deviation: | ± 0.002 ° |
| Mass: | 0.2 kg |
| Flange material: | Die-cast zinc |
| Operating voltage range: | 10 V DC … 30 V DC |
| Bearing lifetime: | 3.0 x 10^9 revolutions |
| Working temperature range: | -30 °C … +85 °C |
| Bus interface: | EtherNet/IP IEC 61784-1 |
| Maximum operating speed: | 6,000 /min |
| Electrical interface: | EtherNet/IP |
| Resolution power: | 262,144 x 1 |
| Max. angular acceleration: | 500,000 rad/s² |
| Connection type: | 3 x connector M12, 4-pin, axial |
| Start up torque: | 0.8 Ncm (+20 °C) |
| Storage temperature range: | -40 °C … +100 °C, without package |
| Operating torque: | 0.6 Ncm (+20 °C) |
| Housing material: | Aluminum |
| Shaft diameter: | 12 mm |
| Moment of inertia of the rotor: | 40 gcm² |
| Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
| Permissible movement radial static/dynamic: | ± 0.3 mm, ± 0.05 mm |
| Resistance to vibration: | 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Data transmission rate (baud rate): | 10 Mbit/s / 100 Mbit/s |
| Shaft material: | Stainless steel |
| Initialization time: | Ca. 12 s |
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
| RPI (requested packet interval): | 5 ms … 750 ms |
| Repeat accuracy: | 0.002 ° |
| Max. number of revolutions: | 1 |
| MTTFd: mean time to dangerous failure: | 80 a (EN ISO 13849-1) |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
