Datasheet
Specification:
| Part Number | 1033904 |
| Start up torque: | 2.2 Ncm |
| Measuring step: | 360 ° /number of lines |
| Error limits: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
| Operating torque: | 1.6 Ncm |
| Permissible movement axial static/dynamic: | ± 0.5 mm, ± 0.2 mm |
| Resolution power: | 4,096 x 1 |
| Shaft diameter: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 “ 3/8 “ 1/2 “ |
| Max. angular acceleration: | 500,000 rad/s² |
| Resistance to vibration: | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Max. number of steps per revolution: | 4,096 |
| Resistance to shocks: | 50 g (according to EN 60068-2-27) |
| Bearing lifetime: | 3.6 x 10^9 revolutions |
| Electrical interface: | Cable, 11-pin, radial, 5 m |
| Repeat accuracy: | 0.005 ° |
| Initialization time: | 80 ms |
| Operation of zero-set: | ≥ 100 ms |
| Working temperature range: | -20 °C … 85 °C |
| Measuring step deviation: | 0.005 °, 0.016 ° |
| Maximum operating speed: | 3,000 /min |
| Storage temperature range: | -40 °C … 100 °C |
| Permissible movement radial static/dynamic: | ± 0.3 mm, ± 0.1 mm |
| Enclosure rating: | IP 64 (according to IEC 60529) |
| Operating power consumption (no load): | 60 mA |
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
| Mechanical interface: | Through hollow shaft |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Max. number of revolutions: | 1 |
| Operating voltage range: | 10 V DC … 32 V DC |
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) |
