Datasheet
Specification:
| Part Number | 1068864 |
| Measuring wire diameter: | 0.45 mm |
| Operating speed: | 4 m/s |
| Enclosure rating mechanic: | IP 50 |
| Electrical interface: | SSI |
| Mass (measuring wire): | 0.58 g/m |
| Connection type: | Universal |
| MTTFd: mean time to dangerous failure: | 270 a |
| Number of steps per revolution: | 8,192 |
| Working temperature range (combination): | Wird definiert durch den h?heren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik |
| Mass (mechanics): | 80 g |
| Working temperature range (mechanics): | -30 °C … +70 °C |
| SET (electronic adjustment): | H-active L = 0 – 3 V, H = 4.0 – Us V |
| Mounted encoder: | AHM36 SSI |
| Repeatability: | ≤ 0.2 mm |
| Housing material, wire draw mechanism: | Plastic, Noryl |
| Working temperature range (encoder): | -30 °C … +70 °C |
| Encoder: | Absolute encoders |
| Length of wire pulled out per revolution: | 150 mm |
| Mass (including encoder): | 200 g |
| Part number encoder: | 1068328 |
| Resistance to vibration: | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Code type: | Gray, binary |
| Supply voltage: | 4.5 V … 32 V |
| Actual length of cable extension: | 1.45 m |
| Life of wire draw mechanism: | 1 million cycles |
| Spring return force: | Ca. 1 N … ca. 1.4 N |
| Clock frequency: | 2 MHz |
| Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
| Linearity: | ≤ ± 2 mm |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Relative humidity / Condensation: | 90 % (condensation of the optical scanning not permitted) |
| Initialization time: | 50 ms |
| Measuring range: | 0 m … 1.25 m |
| Wire acceleration: | 10 m/s? |
| Part number mechanic: | 5324019 |
| Interface signals: | Clock +, Clock -, Data +, Data- |
| Power consumption: | 1.5 W |
| Hysteresis: | ≤ 0.4 mm |
| Enclosure rating encoder: | IP 66 / IP 67 (according to IEC 60529), housing side, IP 66 / IP 67 (according to IEC 60529), shaft side |
| Measuring wire material: | Highly flexible stranded steel 1.4401 stainless steel V4A |
| Resolution (wire draw + encoder): | 0.02 mm |
| Mounted mechanic: | MRA-G055-101D4 |
