Datasheet
Specification:
| Part Number | 1061035 |
| Number of steps per revolution: | 8,192 |
| Mounted encoder: | ATM60 DeviceNet |
| Power consumption: | 2 W |
| Linearity: | ≤ ± 2 mm |
| MTTFd: mean time to dangerous failure: | 150 a |
| Hysteresis: | ≤ 0.4 mm |
| Measuring range: | 0 m … 5 m |
| Life of wire draw mechanism: | 1 million cycles |
| Operating speed: | 4 m/s |
| Spring return force: | Ca. 4.5 N … ca. 7 N |
| Supply voltage: | 10 V … 32 V |
| Working temperature range (mechanics): | -30 °C … +70 °C |
| Enclosure rating mechanic: | IP 50 |
| Mass (including encoder): | 1.39 kg |
| Repeatability: | ≤ 0.2 mm |
| Encoder: | Absolute encoders |
| Bus termination: | Via DIP switches |
| Housing material, wire draw mechanism: | Plastic, Noryl |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Initialization time: | Ca. 12 s |
| Encoder profile: | Generic Profile |
| Resistance to vibration: | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| SET (electronic adjustment): | Via PRESET push button or protocol |
| Actual length of cable extension: | 5.2 m |
| Protocol: | DeviceNet Specification Release 2.0 |
| Electrical interface: | DeviceNet |
| Connection type: | Bus adaptor with cable screw fixings or connector |
| Resolution (wire draw + encoder): | 0.05 mm |
| Relative humidity / Condensation: | 98 % (condensation of the optical scanning not permitted) |
| Working temperature range (combination): | Wird definiert durch den h?heren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik |
| Length of wire pulled out per revolution: | 385 mm |
| Working temperature range (encoder): | -20 °C … +70 °C |
| Mounted mechanic: | MRA-G130-105D3 |
| Mass (mechanics): | 800 g |
| Part number encoder: | 1030018 |
| Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
| Measuring wire material: | Highly flexible stranded steel 1.4401 stainless steel V4A |
| Wire acceleration: | 4 m/s? |
| Part number mechanic: | 5322779 |
| Mass (measuring wire): | 1.2 g/m |
| Address setting: | 0 … 63, DIP-switches or protocol |
| Enclosure rating encoder: | IP 67 |
| Measuring wire diameter: | 0.55 mm |
