Datasheet
Specification:
| Part Number | 1061987 |
| Stainless steel (V2A, 304): | 0.8 |
| Process data structure: | 1 bit pulse output, 1 bit switching output, 14 bit measured value |
| Ambient operating temperature: | -25 °C … +75 °C |
| D: | 18 mm |
| Tightening torque, max.: | ≤ 40 Nm |
| Power-up pulse protection: | + |
| Supply voltage: | 10 V DC … 30 V DC |
| Minimum response time: | Mode acceleration monitoring 1 sec, Mode speed monitoring 50 ms |
| Temperature drift (of Sr): | ± 10 % |
| Output Q Imp: | Pulse output (The pulse sequence corresponds to the damping frequency) |
| Mode: | COM 2 (38k4) |
| Cycle time: | 5 ms |
| Installation type: | Flush |
| Copper (Cu): | 0.4 |
| Repeatability: | ≤ 2 % |
| F: | 56 mm |
| Status indicator Q: | LED, blau |
| C: | 18 mm |
| Acceleration range, adjustable: | 0.1…2 impulses / sec² |
| Housing material: | Metal, Nickel-plated brass |
| Output Q: | Output type (dependant on the adjusted threshold) |
| Note: | The values are reference values which may vary |
| B: | 18 mm |
| Ripple: | ≤ 10 % |
| Status indicator QImp: | LED, yellow |
| Thread size: | M18 x 1 |
| Carbon steel St37 (Fe): | 1 |
| Assured sensing range Sa: | 5.6 mm |
| Power consumption: | ≤ 35 mA |
| Hysteresis: | 5 % … 15 % |
| Connection type: | Connector M12, 4-pin |
| Reverse polarity protection: | + |
| Design: | Cylindrical |
| Housing cap material: | Plastic, PA6 |
| Sensing range Sn: | 7 mm |
| Short-circuit protection: | + |
| Output function: | NO |
| Wire-break protection: | 0 |
| Electrical wiring: | DC 4-wire |
| Process data length: | 16 Bit |
| Voltage drop: | ≤ 2.5 V |
| Aluminum (Al): | 0.45 |
| Shock/vibration: | 30 g, 11 ms/10 Hz … 55 Hz, 1 mm |
| Output current Ia: | ≤ 100 mA |
| Time delay, adjustable: | Mode 0: No start-up delay Mode 1: 0…254 sec., adjustable Mode 2: When reaching the upper threshold |
| Switching output: | PNP |
| Fieldbus integration: | IO-Link V1.0 |
| Enclosure rating: | IP 67 |
| Speed range, adjustable via two thresholds: | 6…12,000 impulses / min |
| Brass (Br): | 0.4 |
| Factory setting: | Operating mode: acceleration monitoring, Threshold acceleration: 1 pulse/sec², Start-up delay mode: time delay, Upper/lower threshold speed: 200/300 pulses/min, Time delay: 5 sec |
| EMC: | According to EN 60947-5-2 |
| Housing length: | 69 mm |
| Thread length: | 52 mm |
| Remark: | Associated graphic see “Installation” |
