Datasheet
Specification:
| Part Number | 6050115 |
| Pressure resistance: | ≤ 500 bar |
| Thread length: | 28 mm |
| Supply voltage: | 10 V DC … 30 V DC |
| Size support ring: | 10 mm x 5.9 mm x 1 mm |
| Short-circuit protection: | + |
| Hysteresis: | 1 % … 15 % |
| Design: | Cylindrical |
| Stainless steel (V2A, 304): | Ca. 0.75 |
| Assured sensing range Sa: | 1.2 mm |
| Remark: | Associated graphic see “Installation” |
| Connection type: | Connector M12, 4-pin |
| Sensing range Sn: | 1.5 mm |
| Repeatability: | ≤ 7 % |
| Housing length: | 56 mm |
| EMC: | According to EN 60947-5-2 |
| Power consumption: | ≤ 10 mA |
| Ambient operating temperature: | -25 °C … +80 °C |
| Enclosure rating: | IP 68 |
| Copper (Cu): | Ca. 0.12 |
| Housing material: | Stainless steel, V2A |
| Thread size: | M12 x 1 |
| Vacuum resistance: | 10-8Torr |
| Temperature drift (of Sr): | ≤ 15 % |
| Housing cap material: | Ceramics, ZrO2 |
| Switching frequency: | 600 Hz |
| Voltage drop: | ≤ 2 V |
| Time delay before availability: | ≤ 50 ms |
| Note: | The values are reference values which may vary |
| Switching output: | NPN |
| Ripple: | ≤ 20 % |
| Power-up pulse protection: | – |
| Size sealing ring: | 5.3 mm x 2.4 mm |
| Output current Ia: | ≤ 200 mA |
| Installation type: | Flush |
| Electrical wiring: | DC 3-wire |
| Aluminum (Al): | Ca. 0.2 |
| Tightening torque, max.: | ≤ 40 Nm |
| Reverse polarity protection: | + |
| Shock/vibration: | 30 g, 11 ms / 10 … 55 Hz, 1 mm |
| Material sealing ring: | FPM |
| Carbon steel St37 (Fe): | 1 |
| Brass (Br): | Ca. 0.34 |
| Output function: | NO |
