Datasheet
Specification:
| Part Number | 1034325 |
| Repeatability: | ≤ 1.5 mm |
| Measuring wire diameter: | 1.35 mm |
| Enclosure rating mechanic: | IP 64 |
| Part number encoder: | – |
| Working temperature range (encoder): | -30 °C … +70 °C |
| Maximum output frequency: | 600 kHz |
| Operating speed: | 4 m/s |
| Relative humidity / Condensation: | 90 % (condensation of the optical scanning not permitted) |
| Reference signal, number: | 1, electronically, gated with A and B |
| Measuring range: | 0 m … 10 m |
| Mounted encoder: | DFS60 |
| Initialization time: | ≤ 32 ms, with mechanical zero pulse width≤ 30 ms |
| Housing material, wire draw mechanism: | Aluminum (anodised), plastic |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Pulses per revolution: | 1,670 |
| Measuring wire material: | Highly flexible stranded steel 1.4401 stainless steel V4A |
| Encoder: | Incremental encoders |
| Enclosure rating encoder: | IP 67 |
| Mounted mechanic: | MRA-F130-110D2 |
| Working temperature range (mechanics): | -30 °C … +70 °C |
| Power consumption: | 0.7 W |
| Hysteresis: | ≤ 3 mm |
| Life of wire draw mechanism: | 1 million cycles |
| MTTFd: mean time to dangerous failure: | 300 a |
| Length of wire pulled out per revolution: | 334.1 mm |
| Linearity: | ≤ ± 2 mm |
| Electrical interface: | 4.5 V … 5.5 V, TTL/RS422 |
| Maximum load current: | 30 mA |
| Connection type: | Connector M23, 12-pin, radial |
| Spring return force: | 15 N … 20 N |
| Resolution (wire draw + encoder): | 0.2 mm |
| Part number mechanic: | 6028627 |
| Working temperature range (combination): | Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik |
| Supply voltage: | 4.5 V … 32 V |
| Resistance to vibration: | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Wire acceleration: | 40 m/s² |
| Resistance to shocks: | 60 g, 6 ms (according to EN 60068-2-27) |
| Mass (including encoder): | 3.8 kg |
| Actual length of cable extension: | 10.2 m |
| Mass (measuring wire): | 7.1 g/m |
| Reference signal, position: | Electronically, gated with A and B |
