Home
» IFM Electronic » Encoders » IFM RN6065 Absolute singleturn double shaft encoder

IFM RN6065 Absolute singleturn double shaft encoder

0.00

The price is not final. Please check with the manager!
SKU: RN6065 Categories: , Tag:

RN-8192-S24/S

Contact Sales

Datasheet

Product characteristics
Resolution 8192 revolutions; 13 bit
Communication interface SSI data interface
Shaft design solid shaft
Shaft diameter [mm] 10
Application
Function principle absolute
Revolution type singleturn
Electrical data
Operating voltage [V] 10…30 DC
Current consumption [mA] < 100
Inputs
Inputs reversal of direction of rotation; reset to zero
Outputs
Code Gray code; (increasing code values when turned clockwise (seen on the shaft))
Code signal Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.)
Measuring/setting range
Resolution 8192 revolutions; 13 bit
Interfaces
Communication interface SSI data interface
Operating conditions
Ambient temperature [°C] -40…100
Max. relative air humidity [%] 98
Protection IP 67
Tests / approvals
EMC
EN IEC 61000-6-4 radiation of interference / industrial environments
EN IEC 61000-6-2 immunity / industrial environments
Shock resistance
EN 60068-2-27 < 50 g 6 ms
Vibration resistance
EN 60068-2-6 < 10 g / 55...2000 Hz
MTTF [years] 289
Mechanical data
Weight [g] 1342.7
Dimensions [mm] Ø 89 / L = 116
Materials flange: aluminium anodised; housing: aluminium anodised
Max. revolution, mechanical [U/min] 6000
Max. starting torque [Nm] 4
Reference temperature torque [°C] 25
Shaft design solid shaft
Shaft diameter [mm] 10
Shaft material
stainless steel (1.4305 / 303)
Max. shaft load axial (at the shaft end) [N] 40
Max. shaft load radial (at the shaft end) [N] 110
Remarks
Remarks
Wires/pins not connected (n.c.) must not be used.
Electrical connection – SSI 1
Connection Cable: 0.15 m, PUR
Connection Connector: 1 x M12; coding: A
Electrical connection – SSI 2
Cable: 0.15 m, PUR
Connector: 1 x M12; coding: A
Diagrams and graphs

1 clock
2 data
t1 ≤ 0.5 µs clock: 1 MHz
t2 < 0.4 µs
t3 = 13…20 µs
T = 1…10 µs
13 Bit without parity bit
Other data

Leave a Reply

Your email address will not be published. Required fields are marked *

Reviews

Reviews about the product IFM RN6065 Absolute singleturn double shaft encoder